Yamaha RX-15

[Evoke.T.Macabre]

dont know if these are similar to the RX-17's... although im guessing that they are.  has anyone worked on a 15 before?  ive been neglecting an unbent 15 for some time. figured it was about time to start processes up--  any help with whatever is apreciated. 

[Circuitbenders]

I couldn't find anything on the RX15 apart from a couple of weak distortions and a whole lot of connnections that lock up, reset and crash the machine including a few that fill the memory with empty patterns so you can't do anything until you've deleted every pattern one by one. Theres also some crashes that will only allow you to start it up again when you've removed the internal battery.

The RX15 and RX11 are major pains in the ass.

[Evoke.T.Macabre]

FUCK!  haha... i was thinking the model number was close to the rx17 and had seen many of those bent, thta it would have been similar bends...  darn. but definetely thanks for the info!

[voodoolikeudoo]

I couldn't find anything on the RX15 apart from a couple of weak distortions and a whole lot of connnections that lock up, reset and crash the machine including a few that fill the memory with empty patterns so you can't do anything until you've deleted every pattern one by one. Theres also some crashes that will only allow you to start it up again when you've removed the internal battery.

The crash that fills the memory with empty patterns is a MASSIVE pain. I gave up after it happened about 5 times on my RX-15. Good to hear i didn't miss anything

[Many_boomers]

The RX15 and RX11 are major pains in the ass.

FUCK

[Many_boomers]

http://www.anoderecords.com/machines/RX-11Mods.html

This guy bent his Rx11, and that's basically a more complex rx15. I imagine that it has a lot of the same chips, just less buttons.

Hmm, I wonder if instead of using a joystick or a rotary switch, if an array of toggle switches or maybe a five row DIP switch would suffice?

I don't want to trash my last Atari stick.

[Circuitbenders]

Have you tried any of these bends, are they actually worthwhile?

That guy must have had a whole lot more patience than i have 

[Many_boomers]

Nnnnnnnno. Because I solder very poorly. But, because I have it, it's nice to know it can be done. And because this thing sounds like decaying sheep ass smells I probably will burn it up trying to broke-tify it ...Later.

[Källman]

Someone is selling a bent rx15 on ebay without telling! everyone! jump him!