Casio MT-140

[iqoruvuc]

another completely distorted mp3.  This keyboards now deceased, or at least in limbo: http://www.garageband.com/mp3player?|pe1|S8LTM0LdsaSlaFW1Y20

[Phallus Day]

I accidentally trashed his little brother, the MT-120!

I also managed to kick a Casiotone 6000 into serious bend territory (like it was churning out random sounds) without opening her up, I just demanded too many things from her at once!

[computer at sea]

I just finished a really satisfying job on one of these.  I hooked up a 16 point patch bay to the largest chip this afternoon and am currently learning my way around the instrument.  I'll post some samples soon.

[iqoruvuc]

This was the first machine I bent but I haven't used it for a couple of years since it no longer works.  I only wired up push to make switches for the bends and pressed them and held them randomly whilst playing the demo or accompaniment - this produced the best results.  There is a classic sound that these things produce, as does the MT-240 which to me sounds a bit like someone saying "ACID", but sometimes you can get 3 or four minutes of mutating madness - not like anything I have ever heard!  Its a favourite of mine!

[computer at sea]

So I cracked this guy back open recently and made some happy advances.  The major thing was installing a pot into the patch bay.  For anyone who hasn't done this before, it is a simple and excellent way to vary your bends.  If your patch bay goes as such * * * * * * * *
                                                                                                                                                                  * * * * * * * *

put a pot between the two rows like this: * * * * * * * *
                                                                               * -----center lug
                                                                               *--------either outside lug
                                                            * * * * * * * *
So then, rather than connecting directly from one point to another, you can patch through the pot.

Anyway, with the MT-140 I found that I got best results by using a 2k pot (cause that was the smallest I had on hand)  with 30 ohms in parallel.   

[computer at sea]

About a zillion years later, here's the video:

http://www.youtube.com/watch?v=BlbRBo3VMu8

[hoffy]

Wow, that's one of the best bends I've seen. Awesome.

[computer at sea]

Thanks!

[hoffy]

Don't suppose if you can tell me if there's any similar bends lurking in the MT-210? I have one, and i like it as a stock unit, but none of the youtube clip's i've seen of it show any interesting bends; just distortion. So i'd rather keep it as is if that's all that's in there...

... on the other hand, your MT-140 is a monster!

[matt the modulator]

Don't suppose if you can tell me if there's any similar bends lurking in the MT-210? I have one, and i like it as a stock unit, but none of the youtube clip's i've seen of it show any interesting bends; just distortion. So i'd rather keep it as is if that's all that's in there...

... on the other hand, your MT-140 is a monster!

i had a 210 and found very little bends well nothing like the mt-140 but the mt-240 is a l40 with midi sync that glitch well worth getting a mt-240