bending C64's VIC-II graphics chip < yay or ney

[Luka]

it seems that sega mega drives, atari2600s, NES systems and gameboys are all the rage for bending at the moment however i have a bunch of c64's with SID chips removed lying around my house and im wondering if there is anyway i can turn this machine into a nice bent vj machine

has anyone had any experience with this?
i have checked the net and cant find too much

yay or ney?

[voodoolikeudoo]

did you ever try this out?

anything decent?

[djsynchro]

Sometimes you just have to be the first one to do it I say Yay, expecially since they're trash now anyway.
The C64 is really primitive, that should be good. Load up something that works the graphic chip (Or write a quick Basic prog that prints coloured blocks or something) then poke around the graphics chip. Don't touch the voltage pin.
Let us now how it went.

[Gordonjcp]

Bear in mind that the address and data pins are shared with the CPU and memory, so shorting them will cause the CPU to crash.  Maybe trace cuts would be a better idea, although if you were feeling particularly hardcore you could remove the VIC-II completely and fit it to a daughterboard with some buffers.