Circuitbenders Forum
Circuitbenders Forum => Circuitbending discussion => Synths & Samplers => Topic started by: casiologie on September 17, 2006, 12:14:36 AM
-
I have almost finished my "Alligatron" project (SK-1 in selfmade case with bending panel)
All the work is descibed in 4 parts here:
http://www.jz-server.de/forum2/e107_plugins/forum/forum_viewforum.php?31
Start with PART 1 !
.
-
wow, red alligator skin effect! that's a bit exotic. ;D nice.
fantastic articles. really detailed, and you can tell a lot of love has gone into the construction of the synth.
-
Thank you very much......It was my first bending project and I'm happy that everything worked out fine.
There is stil a lot of space inside the "box"......I will think about some addition of sound-modules or sequencers inside later on.
I also created a small box with similar design to build some extra stuff.......
(http://www.jz-server.de/werkstatt9019s.jpg) (http://www.jz-server.de/werkstatt9019.jpg)
..
-
That looks fantastic, always nice to see machines with a bit of thought and care put into them.
-
My SK-1 ALLIGATRON wil be midified within the next 4 weeks. This opens more possibilities.
A totally new midi-interface (made by a friend of mine) wil add MIDI IN and MIDI OUT to my SK-1, so it wil act also like a masterkeyboard-controller. I will add a synth-module later on, that will be connected to the SK-1 via MIDI.
I still need some ideas for the small box in the front of the picture above.
Dimensions are: 19 x 16 x 7,5 cm
Maybe some of you guys have some ideas, what I can make out of it.
...
-
Build an analouge filter unit. now that would be cool.
-
filterunit, good idea ! got a nice and simple diagram of a hp/lp/bp filter here
a convincing filter, that would only take little space in your box :)