Circuitbenders Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: sa-20 distortion mod  (Read 8277 times)

dimefan90

  • Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 29
sa-20 distortion mod
« on: November 20, 2008, 11:04:34 PM »
i would like to add a distortion mod to my sa-20, how do i do this. photos would be necessary when explaining as i am relatively new to this.

also is it possible for me to add a pot between the speaker and headphone out to control volume.
Logged

Tyler1144

  • Way to much time on his hands
  • **
  • Karma: 0
  • Offline Offline
  • Posts: 87
Re: sa-20 distortion mod
« Reply #1 on: December 02, 2008, 11:25:42 PM »
Distortion mods can be found by simply touching pins together, and if pins crash when touched then use a pot to make them so resistant to the point they dont crash, but you can hear a sound effect. 3 things that usually cause distortion when messed with
1 Battery input (be careful)
2 pitch resistor
3 speaker leads

Touch those 3 things to each other and other pins with resistance and im sure youll find it
Logged