Circuitbenders Forum

Circuitbenders Forum => Drum machines => Circuitbending discussion => Korg => Topic started by: noiseybeast on February 26, 2010, 03:08:03 PM

Title: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on February 26, 2010, 03:08:03 PM

I've modded this DDD-1 to have a db25 jack for all of the bends and a switch attached to x2 to have a 2.5 octave pitch shift.  

I built a breakout box using an old DB25 cable and am old intercom system as the case.

It's really rough because it's just a prototype for the next one.   I'm really into the idea of modular hookups right now and will do this again, but prettier.  My big problem is cutting a hole for the DB25 port.  

(http://dl.dropbox.com/u/120201/DSC_0360.JPG)

---

[/color]

Title: Re: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on February 26, 2010, 03:09:29 PM

Way too big.  Images will be downsized tommorow and I'll have video.

Title: Re: Modded/Bent DDD-1 Mark2
Post by: Dylan on February 26, 2010, 11:49:46 PM

Looks sexy. Can't wait to see the video.

Title: Re: Modded/Bent DDD-1 Mark2
Post by: Circuitbenders on February 27, 2010, 01:09:49 AM

ever heard of screws?  ;)

Title: Re: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on February 27, 2010, 04:45:22 AM

Yeah, it's ugly.  The breakout box was done in this old intercom case that's really nasty so I wanted the install to reflect the roughness.  

The DDD-1's DB25 port, on the other hand, was just an accident of bad hole cutting. It's been a few years since I did this sort of thing, so I'm a bit rusty.

Title: Re: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on February 27, 2010, 06:42:50 PM

Bit of a delay with the video.  Will have it later this weekend. 

Title: Re: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on March 02, 2010, 05:31:22 AM

Got drunk and delayed.  Coming soon.

Title: Re: Modded/Bent DDD-1 Mark2
Post by: noiseybeast on April 30, 2010, 06:35:22 AM

COMING SOOOOOOOOOOOON