That's smashing, thanks.
SO - - R-100 : Pour initialiser les paramètres uniquement : maintenez le bouton [ERASE] enfoncés pendant que vous mettez sous tension . Pour effacer les patern/song : appareil sou tension, maintenez le bouton de sélection n°1 et appuyez sur [ERASE], puis sur [ENTER] deux fois .
Which apparently translates to -
- R-100: To initialize parameters only: support the button [ERASE] planted while you put under high pressure. To erase patern / song: apparatus penny tension, support the button of selection n°1 and press on [ERASE], then [TO GRAFT] twice.
As sugested, I spent 30 mins powering on the machine with different buttons pressed, and now it's back to normal again. A lucky escape there for me!
Thanks guys
This Kawai R-100 Drum Machine and a half, eh? Midi, loads of outputs, trigger, metronome, tape sync and even has roland + korg din sync.
Just out of interest, do either of you good gentlemen know how I'd go about muting the individual drums? I'm guessing it's just a case of grounding out the correct pins on the correct chip, and then just a matter of wiring some switches, right? Where should I be looking