Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Effects Units => Topic started by: traverse on January 13, 2007, 04:14:55 PM

Title: Need basic technical advise on a build.
Post by: traverse on January 13, 2007, 04:14:55 PM

Hi guys.  Ive got 4 of these switches

(http://www.inertiablooms.com/nib.jpg)

4 l.e.d's

and a midi socket to connect one of each switch to so i can take it off somewhere else.  I need to know the best way to link up the switches and l.e.d's to a battery so i can tell the button is on.  I have no idea of the schematics of things.  Any help would be lovely.

I know this is very basic stuff, but i have no idea!

Title: Re: Need basic technical advise on a build.
Post by: Silas on April 15, 2008, 10:03:06 AM

You do realize those are just momentary push buttons right?

Ooops: Just realized this was an over a year old/dead thread...