you're welcome
hope you find some fresh bends
Right I left this for quite a while as I needed fresh bending supplies but got back to bending at the weekend.
I opened up the 580 first as I didn't want to break the 390 because its good on its own, I found some nice bends in it but nothing crazy (still think there are more though) so I moved on to some other ones (Sa10 - suprisingly poor up to now)
was feeling a bit deflated so I thought why not open up the 390. I was expecting it to look similar to the 580 as they seem similar on the outside but...... chips galore! the first pins I touched sent the demo tune into a crazy spiral of doom! I was overwhelmed by the amount of bends there was and how quickly they were appearing. I didn't even need to look at you pics I printed out nochtan! ha
I have just checked and we have found the same areas to bend pretty much but I reckon I got a few more (I hope)
I have just made a box and put a ton of bolts through it (+ some switches) as alot of the bends respond to pressure and body contact as it can vary so much just on one bend.
once finished i'll let you know but I might actually be to excited and busy to come back! ha
thanks again nochtan...