Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Effects Units => Topic started by: gazz on July 01, 2006, 06:15:21 AM

Title: Danelectro PB&J
Post by: gazz on July 01, 2006, 06:15:21 AM

Hi,
     Can enyone tell me what I can replace the pots in a Danelectro PB&J delay pedal with?
I need the screw down sort. I plan to mount the unit into a heavy duty box with heaver footswitches, and the PCB mounted pots are too close together. The pots have B 104 on them.
Cheers
Gazz

Title: Re: Danelectro PB&J
Post by: Circuitbenders on July 01, 2006, 03:49:30 PM

er, proper pots? ;)

B104 seems a little unlikely, i don't think i've ever seen a 104 Ohm pot but the B means its linear response as opposed to logarithmic. Are you sure its not B100K or something similar?

These pots from maplins are good quality and pretty cheap http://www.maplin.co.uk/Module.aspx?ModuleNo=2203&criteria=Potentiometers&doy=1m7

or theres plenty of other places online that sell them.

Title: Re: Danelectro PB&J
Post by: gazz on July 02, 2006, 05:34:44 AM

Thanks guys,
                   I now know a hell of a lot more than I did yesterday, so it's onward and upward...............hopefully?

Cheers
Gazz