Circuitbenders Forum
Circuitbenders Forum => Circuitbending discussion => BENDING TIPS => Topic started by: dislocations on December 04, 2011, 08:34:37 AM
-
I feel re-painting is often overlooked. For me I'm usually relieved an instrument is finished and working :-))
So, come on and share!!!
-
If its plastic i nomal use plastic primer first or if its metal then metal primer also sanding is important fine wet and dry nomal i finish 800 also put you vinyl film on then most important paint lacquer
(http://i1243.photobucket.com/albums/gg543/01012k7/Synthrotek%20Projects/th_PICT0149_zps9d3d52df.jpg) (http://s1243.beta.photobucket.com/user/01012k7/media/Synthrotek%20Projects/PICT0149_zps9d3d52df.jpg.html) here the sort of thing i do
-
my biggest holdup is doing text - i'm using rub-on letters for gods sake. there must be a better way.
Lazertran? Can I only do that on metal enclosures?
-
I use Transparent lazer Printable Vinyl but you can get Transparent Inkjet Printable Vinyl its about £ 2 pound for A4 sheet and you can use your favorite paint software to make your design, Here a tip do a test run to make shure size is right also you can print it out on paper first and use masking tape and then use it for drilling holes ETC..