I started on my old tv the otherday, i located the yoke and its 4 wires as you can see in this photo...
And where they go to on the board...
Now, i snipped the wires then connected them back up with crocodile clips. It worked, i got a fuzzy picture. i removed the yellow wire and i got a horizontal line, so that must be Vertical, i removed the grey wire, i got a horizontal line, meaning thats the other Vertical. But when i disconnect the blue wire it sparks, briefly shows a vertical line then nothing. Turn it off and on again, i try the red wire and same thing happens except now i get no picture whatsoever, fuzzy or otherwise
But now when i turn it on, i get no picture and a weird buzzing sound and nothing happens when i connect or disconnect the yoke wires, but there is still something going to the yoke 'cause i got a shock from it
oops...
Does anyone have an idea what i might have done? any help would be appreciated