Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Toys => Topic started by: tinsolder on February 22, 2012, 12:53:04 AM

Title: GameboyColor & ltc1799
Post by: tinsolder on February 22, 2012, 12:53:04 AM

Hello out there,  i made a ltc1799  board like some other times before and did all with a 10k- trim pot and a 100k- audio pot in a gameboycolor. I start with the trim all down and the pot all up,  so the cpu won't crash. Then i turn the trim slowly up and so does the tone. Until a point and then it goes slower again. And that's very strange. I tried other trimpots but it's not that. And the 1799 works fine. Anybody any clues? Thanks.

Title: Re: GameboyColor & ltc1799
Post by: Gordonjcp on February 28, 2012, 07:53:24 AM

Can you post a circuit diagram of how you've wired the pots up?

Title: Re: GameboyColor & ltc1799
Post by: tinsolder on February 28, 2012, 09:40:02 AM

shure,there you are.