Circuitbenders Forum
Circuitbenders Forum => Show off your kit. => Topic started by: volg4 on July 04, 2013, 11:30:57 PM
-
hey folks, not posted in a while but here's something i've nearly finished... (<:
it's an akai s01 with about 14 ram bends
i've built a breakout box to house switches and jacks, just a variation of the bend bus idea
everything goes to a 25 pin serial connection so i can use it on my other akai s01
i'll probably build a box for each akai but because they'll both be bent/wired slightly differently, the boxes will act differently on each machine... ;D
the youtube vid was taken about 20 minutes after i first powered it back up months ago and i haven't really touched it since....
would like to bend my other s01 and maybe rehouse both in the same box with interchangeable bend boxes....
circuit bent akai jam (http://www.youtube.com/watch?v=7SJP8rxkc9Q#)
(http://s8.postimg.org/63zcx4xd1/akai01.jpg) (http://postimage.org/)
(http://s7.postimg.org/4c0a9hf5n/akai02.jpg) (http://postimage.org/)
the pots aren't used for the akai but i should be able to hook them up to some future bent kit
cheers