Circuitbenders Forum
Circuitbenders Forum => Drum machines => Circuitbending discussion => Roland & Boss => Topic started by: tonal on April 22, 2006, 10:39:29 AM
-
::) does anyone know if its possible to bend a boss dr220e. if so any advice fully appreciated
-
Yes it is!
There's a website somewhere with one that had been bent, the guy installed a dip switch to turn the bends on and off. Was pretty cool actually, sounds a lot like a 505, but is obviously more limited in terms of features.
EDIT: Here's the link for ya!
http://oscillateur.com/cb_doktor.php
-
;) thanx heaps .