Circuitbenders Forum

Circuitbenders Forum => Drum machines => Circuitbending discussion => circuitbenders.co.uk CB55 - DIY Boss DR55. => Topic started by: cereyanlimusiki on August 05, 2014, 02:52:52 PM

Title: BOM for known supliers?
Post by: cereyanlimusiki on August 05, 2014, 02:52:52 PM

Hello

Does anybody have reference numbers of parts list or BOM that can be shared from any known suppliers? (Digikey,mouser,reichelt )

Title: Re: BOM for known supliers?
Post by: Circuitbenders on August 06, 2014, 10:12:18 PM

Other than the inductor, its all pretty much general purpose stuff you could get from virtually anywhere with a decent range.

I'd normally use Tayda electronics for virtually everything because they're both cheap and don't have dozens of possible different versions to choose from for each part. They don't have the 78L06, inductor or 0.15uF cap though.
http://www.taydaelectronics.com/ (http://www.taydaelectronics.com/)

The problem with places like Mouser and Digikey is that as you've probably noticed, their range is so vast that you have to chose from 200 versions of the same thing when you just want a 10K resistor.