i have no woman...
i have no life...
i have no job...
but one thing i do have...
BASS PEDALS BABY!!!
yes, bass pedals!
i finally figures this out!
are they finished, no...however, let me explain this to you.
i harvested a set of bass pedals out of a lowery organ.
after learning very little, yet enough about reed switches, i am able to use these.
i made a 555 VCO. no potentiometers, however i might add a threshold pot.
i hooked up each of the pedals and was able to trigger the VCO! YES!
but, the notes are not tuned. therefore, it is my theory that i can hook up trimmers in order to TUNE the pedal notes from C to C.
should i also hook up some big electrolytic caps as well?!
thanks in advance for any help.
but, the notes are not tuned. therefore, it is my theory that i can hook up trimmers in order to TUNE the pedal notes from C to C.
You could do that. It wont' be terribly easy to tune, and it will be very sensitive to vibration and temperature changes, but it will work.
should i also hook up some big electrolytic caps as well?!
Depends what you want to hook them up to, and to what effect.
bigger caps for lower pitch...
so i suppose i need to find the actual resistance for each note...