I've been registered on this forum for probably over a year, and just in the past few months, I've started bending and experimenting with my toys again (wild guess what brought this on, lol). Anyway, one of the most promising keyboards I had has now lost several solder pads to my incompetence as a solderer.
I've read in one place online that you can buy silver epoxy (though a bit pricey) to effectively replace the pads, but given the possibility that I could spend $50+ on it and then screw up while applying it to the board, I'm open to other advice. Normally I just scrape away at the trace and see if I can get the solder to stick, but the number and placement of the missing traces would make that impractical.
Anyway, first post ;D Glad to be back in the business of making noise.
Replacing a solder pad that you could actually solder to wouldn't be cheap or easy.
Have you considered just tracing the track back to another solder point and taking a wire from there to whatever component pin that has lost its pad.
Its a bit difficult to advise with a better idea of exactly what you mean. Do you have a photo?