Text only | Text with Images

Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Toys => Topic started by: kenholloway on February 23, 2007, 11:34:45 AM

Title: Very Very simple guide to Furby Circuit Bending Part One
Post by: kenholloway on February 23, 2007, 11:34:45 AM
Hello, I just wrote this, it covers the basics of attaching controls and an audio output to a Furby - aimed at people who have never done anything similar before. Part two will hopefully cover some ACTUAL circuit bending.

Hope it's of some use to someone - any comments appreciated

http://kenholloway.blogspot.com/2007/02/very-very-simple-guide-to-furby-circuit.html

Ken
Title: Re: Very Very simple guide to Furby Circuit Bending Part One
Post by: Circuitbenders on February 23, 2007, 06:48:26 PM
'Next time: Actual Circuit bending' - nice  ;)

You should develop this into a full series.
I've always had problems with furbys (furbies?) mainly down to the fact that you install some mods and then they learn to use different words and your mods don't work the same anymore.

Or maybe that was just the one i had :-\
Text only | Text with Images