Okay - I've been messing around in my SA2 again... seems the thing is FULL of bends - top five legs of the big chip counting from the left
12345
|||||||||||||||
[ ]
|||||||||||||||
link up great (at least with the little bit of wire that i am drunkenly using to probe with) to the smaller chip on the right hand side of the board... via the 4th leg on the bottom row counting back from the right...
||||||||
[ ]
||||||||
4
making quick connections from those legs to leg 4 on the small chip spins out the SA2 and allows u to get to sounds and demos normally locked out (SA1 sounds) plus u can get some really messed up effects applied to the samples too which is fun... i had a weird arpeggio type thing appear (not sure if its just in the Sa1 as a preset as i havent got a SA1 to try here...)
Pin 1 on the big chip is bloody good - pissing around with this i was able to get the SA2 into drum mode where the KB is split (lower keys = drum / higher = snare / highhat and open hihat etc...
very cool
:)
i'm gonna wire up 5 momentary push on switches and have me some fun later, i've run out atm typically :)...
ne7
okay - i wired it up - used pin 1 on the big chip - connected to a 1M pot and a chance push to make button - lets me select (wibbling the pot about and hitting the push to make switch) lots of instruments that are unavailable - for example - split keyboard with access to the percussion sounds (4 of them bd, sn, hc, ho) - theres more too but i am going to faff with that later (it involves some more switches and stuff)
:)
do you mean pin 1 counting from the left side of the dot ? and where did you connect it to ?
hiya - check the diagram in my first post ( turn the sa2 over - so that the arrow above the OPEN sign under the battery cover is pointing up ^)... pin 1 on the big chip connected to pin 4 on the smaller chip,
so >
pin1 chip 1 -> a momentary push to make -> 1M pot -> pin4 of chip 2
u can just fart about hitting the momentary switch as u turn the pot - brings up hidden demo tunes too... hehe like happy birthday :)
the other pins i mentioned in the first post would react well in the same way too...
okay thanks, i have a sa2 laying open at the moment, so why not install your discoveries... :)
let me know how it goes :) - i'm sure there is also a clean and easy way of putting the extra sound select buttons in (should have 0, 5, 6, 7, 8, 9) to get to all the sounds even easier :)
the other pins give access to the other hidden demo tunes too - which is useful if u have yours set up as a random music generator (as per' ghazala)
:)
Quote from: ne7 on June 23, 2007, 07:40:49 PM
okay - i wired it up - used pin 1 on the big chip - connected to a 1M pot and a chance push to make button - lets me select (wibbling the pot about and hitting the push to make switch) lots of instruments that are unavailable - for example - split keyboard with access to the percussion sounds (4 of them bd, sn, hc, ho) - theres more too but i am going to faff with that later (it involves some more switches and stuff)
:)
Did the pot change anything? I find that I get access to all those sounds just by shorting the whole thing very quickly. Also, you might want to check out the big chip, wiring pin 1 (the same you described) to the lower ones. This gives you access to even more sounds, like a choir sound and church organ. Pretty neat (:
yea you can get to all the sounds that a sa1 has by changing which pin you connect to the pot btw...
i got an SA1 the other day from a car boot sale and did the battery drain mod on it (with a fine tune pot too) wow that thing makes some nutty noises :)
THE REST OF THIS THREAD WAS DELETED BY ADMIN AS IT CONSISTED OF A CERTAIN USER WHO IS NOW BANNED SHAMELESSLY PROMOTING STUFF THEY HAVE FOR SALE AND GENERALLY BEING AN ASSHOLE. APOLOGIES IF SOME OF YOUR POSTS WENT WITH IT.,
will try and find some time to pop up some pics of the hacked Sa-1 soon :)
Just got one of these recently, thought I'd add a picture of SA-2 for reference. Ignore the wires.
(http://img15.imageshack.us/img15/530/casiosa2.jpg)
That looks pretty similar to the SA-1
My SA2 died again on me the other night. Just gotta wait a week or two again and hope it comes back to life.
Quote from: computer at sea on June 19, 2009, 05:35:44 PM
That looks pretty similar to the SA-1
The SA-1, 2, 7, 8 and 9 are all almost identical in terms of the mods you can achieve (with the addition/exception of "hidden sounds" and drum triggers for some).
The SA-5 is a bit different which would be obvious if you compare the stock features with other SA-X models.
So I finally finished my SA-2...thank fuck!!
Special thanks to Casper electronics schematics and Breakbeatnazi for all the relevant info.
(http://i224.photobucket.com/albums/dd186/RockinRob_2007/S502003025.jpg)
Woah! Nicely done, loving that big beefy case! The SA-2 must feel so sturdy now as opposed to how dinky it was before.
Yeah, that thing looks bitchin! Can we get a video/list of mods?
Cheers guys!
Yeah, it's well sturdy now. I should have taken more time with the painting though. It is a bit rough.
I wasn't that impressed with the sounds I had got from it so I have re-bent it and added some more mods. I'll post some pics and a vid soon as I get it together.
Here she is!! The new improved Casio Sa-2!
(http://i224.photobucket.com/albums/dd186/RockinRob_2007/CIRCUITBENTCASIOSA-225.jpg)
Get some big metal equipment rack handles on there!
Everything looks better with rack handles.............
Ha ha! Yeah, they do look cool!
:D fantastic hehe
Circuit bent Casio SA-2 (http://www.youtube.com/watch?v=VKp08Q4eLl4#lq-lq2-hq-vhq)
Modifications-
1. Red power on LED.
2. D.C. power socket.
3. 1/4" jack socket.
4. Bass drum trigger.
5. Hi-hat trigger.
6. Snare trigger.
7. 5th's switch. Plays note a 5th higher at the same time.
8. Glitch randomizer. Pot and toggle switch.
9. Tone generator. Pot and toggle switch.
10. 'Wasp' tone generator. (creates wasp sounding drone effect that also boosts treble). Toggle switch.
11. Distortion/feedback. Pot and on/off switch.
12. Hidden sounds selector switch.
13. Re-housed in sturdy MDF case with 4 rubber feet!
There is a lot more stuff you can do with these keyboards i.e. 5th lower switch, power crash, extra drum triggers for rim shot, hand clap and cymbal etc. Also more hidden sounds are available. I was unable to achieve any more with this keyboard as my soldering was so blobby I didn't dare risk any more attaching to the chips through fear of joining adjacent legs together. Most of the info for this came from Peter Edwards schematics from Casper electronics -
http://www.casperelectronics.com/finished-pieces/casio-sa-keyboards/ (http://www.casperelectronics.com/finished-pieces/casio-sa-keyboards/)
And it wouldn't have been possible without this forum and Breakbeatnazi's help. Thanks all!