Print Page - Second bend successfully completed! (data cut with patchbay)

Title: Second bend successfully completed! (data cut with patchbay)
Post by: egr on July 21, 2008, 01:38:57 AM

Yamaha PSS-170:

(http://i157.photobucket.com/albums/t73/arniepics_2007/YamahaPSS-170.jpg)

Doing the standard data cut mod with a patchbay was far FAR more involved than I anticipated but it is done! Yay! :D Definitely will have to do some labeling on this one eventually.

Title: Re: Second bend successfully completed! (data cut with patchbay)
Post by: hoffy on July 22, 2008, 04:05:42 AM

Nice work. Care to upload some sounds?

Title: Re: Second bend successfully completed! (data cut with patchbay)
Post by: egr on July 22, 2008, 04:53:42 AM

I'll post a link tomorrow or the next day. I'm trying to be methodical and work my way through at least a good deal of the combinations. Using the manual that somebody posted a link to on here for the YM2413 I've been able to purposefully set a few parameters. Overall, not as "fun right out of the box" as the pots I put on my last project.

Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Synths & Samplers => Topic started by: egr on July 21, 2008, 01:38:57 AM