Text only | Text with Images

Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Topic started by: Silas on January 13, 2009, 12:32:39 PM

Title: Small PCB instead of clock/timing capacitor ?!?!
Post by: Silas on January 13, 2009, 12:32:39 PM
Ok, what is going on here..

I open up and see an actual PCB where a crystal clock / timing capacitor is supposed to be.. There is three connections to the rest of the board..  Should i remove it and replace with something else, or is it possible to modify it to get changable clocking ?

Anyone seen this before?
Title: Re: Small PCB instead of clock/timing capacitor ?!?!
Post by: Gordonjcp on January 13, 2009, 01:19:23 PM
Depends what's on the PCB, and what it's in.  Can you give us some more details, and possibly a pic of the board?
Title: Re: Small PCB instead of clock/timing capacitor ?!?!
Post by: Silas on January 13, 2009, 03:33:25 PM
there's 5-6 resistors, a transistor and a capacitor.. I will take a pic.. If I can find my friggin camera.. Keep alert!
Title: Re: Small PCB instead of clock/timing capacitor ?!?!
Post by: shimshon on January 14, 2009, 01:54:32 AM
are you sure that's a timing circuit and not for amplification?
Title: Re: Small PCB instead of clock/timing capacitor ?!?!
Post by: Silas on January 14, 2009, 11:01:23 PM
Quote from: shimshon on January 14, 2009, 01:54:32 AM
are you sure that's a timing circuit and not for amplification?

yes
Text only | Text with Images