Text only | Text with Images

Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Synths & Samplers => Topic started by: tomy45 on March 01, 2009, 09:13:36 AM

Poll
Question: Need advice
Option 1: Broken votes: 0
Option 2: Can be repaired votes: 0
Title: MAM MB-33 Problem
Post by: tomy45 on March 01, 2009, 09:13:36 AM
Hi there,

i am newbie, i have already read problems about MAM MB-33, but i could not find a solution for my problem. And my problem is:

- After tuning on device, button AutoTune pressed (short time - long time) midi light does not go off. In my DAW is everything set right. Midi channel, audio in channel and on the back of the device, midi channel set the same just like in my DAW. After turning on the device sound comes out the device, for 6 -8 sec., can be modulated with knobs on MB but does not match the midi clip - map i am sending to the device.

Do i have a broken MB-33? or i missed something?

Thank you very much for any advice.

Tomy
Title: Re: MAM MB-33 Problem
Post by: Circuitbenders on March 01, 2009, 01:48:06 PM
persumably you've seen the thread thats currently about 4 topics down on the 'keyboards & synths '  board?

http://www.circuitbenders.co.uk/forum/index.php/topic,302.0.html

Theres no real answers but it might give you some ideas
Text only | Text with Images