Circuitbenders Forum
Circuitbenders Forum => Circuitbending discussion => Topic started by: andy_wheels on July 02, 2006, 11:49:31 AM
-
can anyone recommend some paint which will apply ok on the plastic cases and keys of casio's? i've done a bit of research and acrylic or enamel seem to be the way forward but i'm still not 100% sure...
hmmm, maybe a stunning pink colour is the look for my sa-1! ;D
-
From my days of painting airfix kits and war hammer fantasy figures I'd recomend spray on acrylic, you'll get a nice even coverage and it drys quick too.
-
Yeah, cans of spray on acrylic work fine, but make sure you get a can of black or white primer to spray on as a first coat or else it'll all just peel off on unsanded plastic.
-
Yep, i experienced that lol. Enthousiasticly bought a cool Pearl-White spraycan, but forgot about the primer...lol.
Now i can peel of the paint an make cool pictures with my nails. O_O
-
is that oil or water based primer?
-
Hi - I attempted a full respray once last year, and it turned out to be unbelievably expensive and a total waste of time because the machine died unexpectedly just as I had screwed it back together!
I went to Wilko and bought some plasti-Kote cans of spray-paint. Although it was only a small toy I ended up using about two cans of white primer and one and a bit cans of paint.
You can buy the primer there. I believe you should use white if you using bright colours and grey if you are using dark colours. I tried spraying outside but the wind took most of the spary away and dust kept blowing onto the paint. Dedfinately spray inside if you have a derilict room and household full of people indifferent to the toxic smell of solvents.
Negativity aside the finished product looked really good, but is incredibly time consuming as I had to do several sections in parts with several light coats over the coarse of several days.
Wilko also sell an own brand budge paint, plus primer but I don't know what it's like. Reed Ghazala's book has quite a few tips for painting which are quite handy, especially to someone like me who has no experience of using spray paint.
-
sounds to me like you might have been spraying a bit far away from the target object. this results in the particles drying before they make contact and you lose most of the paint to the air/furniture/nose/lungs etc..
i've primed up 4 synths with one can of plasticoat primer and it's still going! they key to succesful spraying is constant movement and getting a good angle on whatever the target is.