Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Effects Units => Topic started by: dislocations on July 25, 2012, 07:59:07 AM

Title: Kaoss Pad KP1
Post by: dislocations on July 25, 2012, 07:59:07 AM

Bit of a long shot here but I have a KP1 which keeps cutting out (appears to reboot) after a short time. Tried factory restore. Any ideas? Don't think it's to do with the power supply as it doesn't actually go off. Like I said, a long shot!!!!

Title: Re: Kaoss Pad KP1
Post by: der Warst on August 14, 2013, 11:17:21 AM

I had the same problem with mine:

http://der-warst.de/warstware/kp1.html (http://der-warst.de/warstware/kp1.html)

Simple solution: get a stronger power supply. The original PSU seems to be too weak with 750 mAh. Once I tried it with a 1500 mAh one, the problem was gone for good.