Circuitbenders Forum

Circuitbenders Forum => Drum machines => Circuitbending discussion => circuitbenders.co.uk CB55 - DIY Boss DR55. => Topic started by: jepyang on April 14, 2015, 11:20:28 AM

Title: Snare and Hats switching jacks
Post by: jepyang on April 14, 2015, 11:20:28 AM

Anyone know a Canadian/North American source for the 7-pin switching jacks used for the snare and hats individual outs?I can't find anything from Digikey or Mouser. I found a couple possibilities on ebay, but the sellers are from China and don't have data sheets or part numbers available so I don't know the pinout.

Title: Re: Snare and Hats switching jacks
Post by: Circuitbenders on April 14, 2015, 04:08:25 PM

You could always use actual switches and switch J1 and J2 in and out by hand.

Title: Re: Snare and Hats switching jacks
Post by: jepyang on April 14, 2015, 10:32:54 PM

That's plan B but the switching jacks just seem like such an elegant solution to a messy problem.

Title: Re: Snare and Hats switching jacks
Post by: Altitude on April 15, 2015, 03:15:31 PM

has anyone considered passively mixing the noise before the jack?

Title: Re: Snare and Hats switching jacks
Post by: Circuitbenders on April 15, 2015, 08:42:24 PM

Quote from: Altitude on April 15, 2015, 03:15:31 PM

has anyone considered passively mixing the noise before the jack?

in what sense?