Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Effects Units => Topic started by: Zagreus on May 31, 2017, 02:13:15 PM

Title: Boss ME-50 modification question
Post by: Zagreus on May 31, 2017, 02:13:15 PM

Hello dear friends I will be short.
I want to modify my ME-50 and split modulation and rev/delays go through the stereo outs ONLY and distortion wah and comp to go through another output ONLY .(maybe through the headphone out)
Purpose being to hook up mod/delays in the fx loop of my amp and dis/comp in the front using the different outputs.while i plug my gtr on the input of the Boss.
is there a way to do that and if so,can anyone instruct me on how to do it?

Thank you very much

Title: Re: Boss ME-50 modification question
Post by: Circuitbenders on June 01, 2017, 09:56:06 PM

But its 100% digital isn't it?
If theres nothing analogue in there then its unlikely the signal ever leaves the digital domain before the final output stage, which means all the effects and mixing will be done on the DSP chip. In that case it won't be possible to separate out any effects to different outputs.