Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Topic started by: ujuoh on April 01, 2018, 10:43:31 AM

Title: MFB Tanzmaus
Post by: ujuoh on April 01, 2018, 10:43:31 AM

I want to know if it is possible to bend a tanzmaus to be able to send cv triggers to a eurorack module. I've got a cp909 by tiptop audio, and the circadian rhythms (maybe a bit off-topic), however I don't need the circadian anymore. So I'd just like to trigger this one clap, with my drum machine. Any ideas back from anyone would be sick.

Title: Re: MFB Tanzmaus
Post by: swiftyfrisko on April 03, 2018, 09:28:05 AM
The CP909 needs a Gate in to trigger and a Gate in for accent. You could either use a MIDI to Gate kit if the Tansmaus allows you to assign MIDI ON notes to pads, or you could assign two sounds to separate outputs on the Tansmaus and buy/build a simple "audio to gate" circuit for each output. There's one sold in the shop here: - that's the simplest thing I can think of.
Title: Re: MFB Tanzmaus
Post by: silverbull on January 30, 2019, 08:45:23 AM
I think it is possible.