Circuitbenders Forum
Circuitbenders Forum => Circuitbending discussion => VJ stuff => Topic started by: Bildheinzer on January 07, 2009, 02:30:40 PM
-
Hey just signed up on this Page...
check out my bent Videomixer ..
http://www.bildheinzer.de/wp-content/uploads/2008/12/frontneu.jpg
<object width="400" height="300"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=2498102&server=vimeo.com&show_title=1&show_byline=1&show_portrait=0&color=&fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=2498102&server=vimeo.com&show_title=1&show_byline=1&show_portrait=0&color=&fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object>
Bent Mixer (http://vimeo.com/2498102) from Bildheinzer (http://vimeo.com/user1026648) on Vimeo (http://vimeo.com).
You find more info on www.bildheinzer.de
Does anybody has some info on how to bend an Atari 2600 for visuals?
-
Does anybody has some info on how to bend an Atari 2600 for visuals?
I think this was addressed here, but I don't remember where.
As I recall, the conventional wisdom was that the hardware on the 2600 isn't much for bending, but that the pins on the carts could be shorted for some bends.
-
That is ace.
-
i have no hat, but i take it off for you anyway
this very nice job you did there :o i think real nice in the party
wow.. how it respond to the heavy bass...
congratulations with your machine
-
Thanks for the comments!
Page is updated now with more info and schematics!
Cheers!
Bildheinzer