Circuitbenders Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Boss DR-550 Output Issue  (Read 6696 times)

billak

  • Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 1
Boss DR-550 Output Issue
« on: November 05, 2013, 12:37:46 PM »

Hi guys,

Just dug out my old DR-550 to give a few bends a go, but unfortunately it seems the output is a bit buggered.

Neither of the large output jacks give any signal and the sound from the headphone jack is only working on one channel, at a very low volume and with a lot of constant noise.

I cracked it opened and cleaned all jacks with contact cleaner, cleaned inside the volume pot and checked all of the components and solder joints. Couldn't find a problem and the cleaning didn't help at all.

Has anyone got any idea what I can try next or any experience with the same issue?

Any help is very much appreciated!
Logged