Circuitbenders Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Roland SH101 replacement *BLUE* LED  (Read 5191 times)

dynamixii

  • Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 2
Roland SH101 replacement *BLUE* LED
« on: December 07, 2015, 02:22:33 AM »

I know the original LEDs are the > GL9PR2 LED red SHARP GL-9PR dimensions about 25x2x7.5mm can anyone point me in the direction of a blue LED i can use in place of this one?

Thanks in advance...


 8)
Logged

Circuitbenders

  • crustypaul
  • Admin
  • This person is dangerously insane.
  • *****
  • Karma: 1102
  • Offline Offline
  • Posts: 2451
    • Circuitbenders.co.uk
Re: Roland SH101 replacement *BLUE* LED
« Reply #1 on: December 07, 2015, 02:13:02 PM »

I don't think those dimensions are correct. Which part of it is 25mm? The flat top is 2x5mm isn't it?

Any standard rectangular blue LED will work. You can get them in bags of 50 or 100 from china for less that you could buy 5 or 6 locally, and thats including shipping!

I'd advise getting ones with blue plastic rather than the clear ones, as the clear ones are way too bright.

Like these http://www.ebay.co.uk/itm/181499954277
Logged
i am not paid to listen to this drivel, you are a terminal fool

dynamixii

  • Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 2
Re: Roland SH101 replacement *BLUE* LED
« Reply #2 on: December 07, 2015, 04:29:00 PM »

Thanks for the help ! You rock!!!
Logged