Circuitbenders Forum > Parts, Components, Unbent machines & Junk

Parts in Canada

(1/2) > >>

goldenbaby:
I have found several sites where I can order electronics from, in Canada.
The problem is that all of these sites have massive selections, and pictures for their products.
So I'm always presented with ways to refine my search by power and heat ratings, brand name, etc, etc, and I don't know (or care) about all that crap.  I just want to know the crucial information and not have so much selection.

Digikey, Electrosinc and Newark are definitely all excessively large and without so much as a picture to let you know what you're really ordering.

Any suggestions?

computer at sea:
Mouser is pretty big, but most of their stuff has data sheets that you can look at to make sure you're getting the right thing.  I order there a bunch, so if you need part numbers for common items like pots or  555's or whatever, let me know.


Here's their site for Canada
http://ca.mouser.com/

goldenbaby:
Oh, sweet, thanks.  Datasheets should at least help me out.

I ordered last night from Parts-Express, which is based in US.  I managed to find a Canadian-based company that has an outlet 45 minutes away, but I don't typically drive to the city, and the shipping was like $19 on $48 worth of stuff.  Which is only a few of the basic parts...so since my brother actually has rented an American mailbox, etc, etc.

I'll check out Mouser next time.  I'll likely have enough parts for my first three projects, but I haven't a clue where to look for nice knobs and stuff.  Maybe I can bust some off of other items.

computer at sea:
I generally get knobs on ebay from that seller partspipe http://tinyurl.com/6hk8lj

I've had some bad luck with Hong Kong based sellers, but this one has always been pretty good by me.  100 SPDT switches for 40 bucks is pretty hot.  Another seller that sold me switches in bulk had really shitty ones where the solder wouldn't adhere well to the posts and they broke earlier, but I've purchased 300 from this outfit without trouble.  Some of the partspipe switches are installed on keyboards I've been playing live with for a year plus and are still snappy and tough.

goldenbaby:
PartsPipe looks like a great source for some decent looking knobs and what-not.

Navigation

[0] Message Index

[#] Next page