Circuitbenders Forum
Circuitbenders Forum => Circuitbending discussion => Effects Units => Topic started by: wax+wire on January 16, 2022, 02:29:27 AM
-
Hey
So I've been working on circuit bending my KAOSS Pad 2 / KP2. I had added a LTC1799 clock mod, a switch to hold the pad motion latch, and a patch bay of bannaa plug all connected to the RAM chip.
I'd been doing it over months, and stupidly forgot how to put it back together, and managed to put a crack right through the screen.
The screen is just two piece of glass with a resistance pressure strip around it, but it doesn't seem to work with cracked glass! I'm wondering if I should be able to just replace the broken glass with another piece, or replace the whole screen, or what other ideas there are out there. Feel like such a fool