• Welcome to Circuitbenders Forum.

Bent Video Mixer

Started by Bildheinzer, January 07, 2009, 02:30:40 PM

Previous topic - Next topic

Bildheinzer

Hey just signed up on this Page...

check out my bent Videomixer ..


http://www.bildheinzer.de/wp-content/uploads/2008/12/frontneu.jpg



<object width="400" height="300"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=2498102&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=2498102&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object>
Bent Mixer from Bildheinzer on Vimeo.

You find more info on www.bildheinzer.de

Does anybody has some info on how to bend an Atari 2600 for visuals?

computer at sea

Quote
Does anybody has some info on how to bend an Atari 2600 for visuals?

I think this was addressed here, but I don't remember where.

As I recall, the conventional wisdom was that the hardware on the 2600 isn't much for bending, but that the pins on the carts could be shorted for some bends.


3rdness


nochtanseenspecht

i have no hat, but i take it off for you anyway
this very nice job you did there :o i think real nice in the party
wow.. how it respond to the heavy bass...
congratulations with your machine

Bildheinzer

Thanks for the comments!

Page is updated now with more info and schematics!

Cheers!

Bildheinzer