Circuitbenders Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: GameboyColor & ltc1799  (Read 6699 times)

tinsolder

  • Newbie
  • *
  • Karma: 1
  • Offline Offline
  • Posts: 14
GameboyColor & ltc1799
« on: February 22, 2012, 12:53:04 AM »
Hello out there,  i made a ltc1799  board like some other times before and did all with a 10k- trim pot and a 100k- audio pot in a gameboycolor. I start with the trim all down and the pot all up,  so the cpu won't crash. Then i turn the trim slowly up and so does the tone. Until a point and then it goes slower again. And that's very strange. I tried other trimpots but it's not that. And the 1799 works fine. Anybody any clues? Thanks.
Logged

Gordonjcp

  • This person is dangerously insane.
  • *******
  • Karma: 78
  • Offline Offline
  • Posts: 1005
    • http://www.nekosynth.co.uk
Re: GameboyColor & ltc1799
« Reply #1 on: February 28, 2012, 07:53:24 AM »
Can you post a circuit diagram of how you've wired the pots up?
Logged
If at first you don't succeed, stick it through a fuzzbox.

tinsolder

  • Newbie
  • *
  • Karma: 1
  • Offline Offline
  • Posts: 14
Re: GameboyColor & ltc1799
« Reply #2 on: February 28, 2012, 09:40:02 AM »
shure,there you are.
Logged