Circuitbenders Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Haking an old serial port cames controller.  (Read 8785 times)

Signal:Noise

  • Closer to the meat
  • *****
  • Karma: 16
  • Offline Offline
  • Posts: 291
Haking an old serial port cames controller.
« on: December 16, 2006, 04:45:54 PM »
found one for feck all in a charity shop today and bought it as it was cheap and thought ot'd make an interesting controller for  a drum machine or something, but I've no idea how best to hack it to do this. anyone got anytips on using gear like this as a controller?
Logged

nochtanseenspecht

  • Three fingered inbred banjo plucker
  • ******
  • Karma: 21
  • Offline Offline
  • Posts: 363
Re: Haking an old serial port cames controller.
« Reply #1 on: December 17, 2006, 03:40:55 AM »
you mean a joystick ? this is what i am doing ; i measure witch function goes to witch pin, write it down.
then solder the same pin on the connector to the right points of a circuitboard, et voila :
a quick and easy, cheap, no space problem- way to control an instrument or a toy !
most work could be that you have to change a pot inside the joystic for a usable value.
but i swear by it !

here's a handy link by the way : http://pinouts.ru/connector/15_pin_D-SUB_male_connector.shtml
Logged

Signal:Noise

  • Closer to the meat
  • *****
  • Karma: 16
  • Offline Offline
  • Posts: 291
Re: Haking an old serial port cames controller.
« Reply #2 on: December 17, 2006, 11:14:03 AM »
It's not a joystick, more like a ps2 controller but without he analouge sticks, I'm guessing the pins are pretty standard though.

Ta for the link as well.
Logged